Vinyl acetate homopolymer polytex - 519

البوليمر > مستحلبات بولي فينيل خلات ومشتقاتها

مواد لاصقة

أثاث من الخشب
الورق، الطباعة و التغليف > لب الورق والصناعات
الغزل والنسيج > اقمشه منسوجه

Polymer Iran

• miscible with a wide range of nonionic and anionic aqueous polymers.
• compatible with Glycol ethers and Phethalate ester and Benzoate types.
• compatible with amorphous and crystalline carbonate, silica, clay, lithopone, talk, etc.
• compatible with Acrylic Acid-based, Polyvinyl alcohol ,Cellulose ethers and Poly urethane thickeners.
• compatible with different types of Coalescence agents, such as Texanol, 402 solvent, Diethylene glycol monobutyl ether.

Polytex- 519 can be used alone or together with fillers for carpet finishing to give suitable hardness properties to the final product. Polytex- 519 is used for production of wood glue and binder.
It is also used for woodwork joints and decorative paints.

6 month from production date under standard conditions and away from freezing, direct sunlight and heat.

It is not recommended for exterior application on its own.
While using Polytex-217, according to the usage, the film formation temperature can be decreased by coalescence agents and by using thickeners reach to the suitable viscosity. Using anti foam to the level of 0.1 to 0.3% when using this is necessary and in order to prevent of microorganisms attacks suitable preserver should be used.
Using of glycols leads to resistance against freezing increases but altogether the film formation temperature will not decrease noticeably.