الوثائق الفنية
BUP 630 is an un-promoted orthophthalic based unsaturated polyester resin with low color, medium viscosity, limited water absorption and very good mechanical properties for ambient temperature cure with MEK peroxide.
تفاصيل
Unsaturated Polyester Resin
- Low color
- Medium viscosity
- Limited water absorption
- Resistance to hydrolysis
- Impact resistant
- Very good mechanical properties
- Water contact/ hygienic approval
Manufacturing pipes
Manufacturing tanks and reservoirs
Fabricating structural hygienic fittings
Hand lay-up
Aqua park equipment fabrication
Marine vessels and boats
Pultrusion
Store in a cool place below 25 °C and away from moisture and direct sunlight. Under above mentioned storage conditions, the shelf life of the resin will be at least 6 months ex-works.
The usual protective measures employed during the handling of Unsaturated Polyester Resins should be observed. Further product safety information can be obtained from our Material Safety Data Sheet which is available on request.
225 kg (net) in steel drums
معلومات تقنية
كمية | قدر | وحدة | التعلیق |
---|---|---|---|
خصائص المظهر | |||
Appearance | Transparent | ||
Color | <2 | Gardner | |
الخصائص الفيزيائية | |||
Density | 1.1351 | g/ml | |
Viscosity | 450 - 700 | cP | |
Solid Content | 63 ± 2 | % | |
الخصائص الحرارية | |||
Heat Deflection temperature | >65 | ºC | |
Exotherm peak temperature | <190 | ºC | |
خصائص ميكانيكية | |||
Flexural strength | >120 | MPa | |
Tensile strength | >60 | MPa | |
Tensile elongation | 3.4 | % | |
barcol hardness | >40 | ||
الخواص الكيميائية | |||
gel time | 15 - 35 | min |
اتصل بالمورد
للاتصال الموردين من هذه الماد وتسجيل طلب للحصول على سعر، عينة، التشاور أو قبل الفاتورة، يرجى ملء استمارة الطلب.