my
الوثائق الفنية
Jampilen EP310D is a high molecular weight, heterophasic polypropylene (PP) copolymer. It is suitable for processing by injection molding, extrusion blow molding and blown film. Jampilen EP310D is used in the extrusion of films for adhesive tapes, films for lamination to paper & other resins.
تفاصيل
نوع المنتج
تطبيقات
منتج
التركيب الكيميائي
heterophasic polypropylene (PP) copolymer
مزايا
- good stiffness
- very high impact strength (even at -20°C)
- excellent processability
- high mechanical properties
تطبيقات أخرى
Packaging
Films for adhesive tapes
Films for lamination to paper & other resins
Blow molded containers for detergents, toiletries and foodstuffs
Blow molded technical parts
Corrugated board, smooth and corrugated pipe
معاملة
This grade is food contact approved.
معلومات تقنية
| كمية | قدر | وحدة | التعلیق |
|---|---|---|---|
| الخصائص الفيزيائية | |||
| MFI | 0.8 | g/10min | ASTM D1238;at 230°C, 2.16 kg |
| Density | 0.9 | g/ml | ASTM D1505 |
| الخصائص الحرارية | |||
| Vicat softening temperature | 150 | ºC | ASTM D1525;at 10 N |
| Heat Deflection temperature | 85 | ºC | ASTM D648; at0.46 MPa |
| Oven aging | 360 | h | ASTM D3012; in Air at 150°C |
| خصائص ميكانيكية | |||
| Rockwell Hardness | 80 | ASTM D785; R scale | |
| Izod impact strength (notched) | 200 | J/m | ASTM D256;at0°C |
| Izod impact strength (notched) | 70 | J/m | ASTM D256;at -20°C |
| Izod impact strength (notched) | 650 | J/m | ASTM D256;at 23°C |
| Elongation at yield | 15 | % | ASTM D638 |
| Tensile Stress at yield-MD | 27 | MPa | ASTM D638 |
| Flexural modulus-MD | 1150 | MPa | ASTM D790 |
| الخواص البصرية | |||
| gloss | 12 | % | ASTM D2457; 60 μm |
| Haze | 60 | % | ASTM D1003; 60 μm |
اتصل بالمورد
للاتصال الموردين من هذه الماد وتسجيل طلب للحصول على سعر، عينة، التشاور أو قبل الفاتورة، يرجى ملء استمارة الطلب.