LG Chemical HIPS MI750L PS, Impact Modified

الوثائق الفنية

PS, Impact Modified.

تفاصيل

CAS

9003-55-8

نوع المنتج

البوليمر > بس غس

تطبيقات

صناعة البوليمرات
صناعة البوليمرات > صب الحقن

منتج

Lg Chem

مزايا
    High Gloss
تطبيقات أخرى

Electric/Electronic Components
Stationary Articles
Food Containers

معلومات تقنية

كمية قدر وحدة التعلیق
الخصائص الفيزيائية
Humidity <0.01 % injection molding
MFI 12 g/10min Temperature 230 °C, Load 3.8 kg, ASTM D1238 (I)
MFI 51 g/10min Temperature 220 °C, Load 10 kg, ASTM D1238(G)
MFI 4 g/10min Temperature 200 °C, Load 5 kg, ASTM D1238(G)
Specific Gravity 1.05 ASTM D792
Linear Mold Shrinkage 0.004 - 0.008 cm/cm ASTM D955
Melting range 190 - 220 ºC injection molding
الخصائص الحرارية
Dry Time 120 - 240 min injection molding
Vicat softening temperature 93 ºC Load 5 kg, 50°C/h; ASTM D 1525
UL RTI 50 ºC Electrical, Thickness 1.5, 3mm
UL RTI 50 ºC Mechanical with Impact, Thickness 1.5, 3mm
UL RTI 50 ºC Mechanical without Impact, Thickness 1.5, 3mm
Flameability UL94, Thickness 1.5, 3mm
خصائص ميكانيكية
Tensile strength 40.2 MPa Yield, Thickness 3.2 mm, 50 mm/min; ASTM D638
Elongation at break-MD 67 % Thickness 3.2 mm, 50 mm/min; ASTM D638
Elongation at yield 5 % Thickness 3.2 mm, 50 mm/min; ASTM D638
Tensile modulus-MD 2373.2 MPa Thickness 3.2 mm, 1 mm/min; ASTM D638
Flexural strength 60.8 MPa Yield, Thickness 3.2 mm, 15 mm/min; ASTM D 790
Flexural modulus-MD 2863.5 MPa Thickness 3.2 mm, 15 mm/min; ASTM D 790
Rockwell Hardness 112 ASTM D 785
الخواص الكهربائية
Hot Wire Ignition 15 - 30 s HWI, Thickness 3- mm
HAI)High Amp Arc Ignition) >120 arcs Thickness 3 mm, HAI
Arc Resistance 120 - 180 s ASTM D 495
Dielectric Strength 40 Kv/mm
Volume resistance 1e+014 ohm-cm
Hot Wire Ignition 7 - 15 s HWI, Thickness 1.5- mm
HAI)High Amp Arc Ignition) 60 - 120 arcs Thickness 1.5 mm, HAI
خصائص العملية
Drying Temperature 80 ºC injection molding
Mold Temperature 40 - 70 ºC injection molding
Middle Barrel Temperature 180 - 200 ºC injection molding