myInjection Molding Grade, PC/ABS+CNT, Electrostatic Dissipation, High Flow, Good Processability
تفاصيل مركب
CAS
7440-44-0
تطبيقات
منتج
معلومات تقنية
| كمية | قدر | وحدة | التعلیق |
|---|---|---|---|
| الخصائص الفيزيائية | |||
| Humidity | <0.01 | % | |
| Specific Gravity | 1.21 | ASTM D792 | |
| Linear Mold Shrinkage | 0.004 - 0.006 | cm/cm | Thickness 3.2 mm |
| الخصائص الحرارية | |||
| Flameability | Thickness 3.2- mm | ||
| Flameability | Thickness 2.5- mm | ||
| Flameability | Thickness 1.6- mm | ||
| Flameability | Thickness 0.8- mm | ||
| UL RTI | 60 | ºC | Mechanical without Impact |
| UL RTI | 60 | ºC | Mechanical with Impact |
| UL RTI | 60 | ºC | Electrical |
| Heat Deflection temperature | 250 | ºC | |
| Dry Time | 180 - 300 | min | |
| Thermal Conductivity | 1.7 | W/mk | Laser flash method |
| خصائص ميكانيكية | |||
| Izod impact strength (notched) | 19.6 | J/m | Thickness 3.2 mm |
| Flexural strength | 127.48 | MPa | Thickness 6.4 mm |
| Flexural modulus-MD | 12944.77 | MPa | Thickness 6.4 mm |
| Tensile strength | 73.55 | MPa | Thickness 3.2 mm |
| Elongation at break-MD | >5 | % | Thickness 3.2 mm |
| الخواص الكهربائية | |||
| Volume resistance | 1e+016 | ohm-cm | |
| Surface Resistance | 1.000E+006 - 1.000E+009 | ohm | IEC 60093 |
| خصائص العملية | |||
| Mold Temperature | 130 - 150 | ºC | |
| Middle Barrel Temperature | 310 - 320 | ºC | |
| Drying Temperature | 120 - 140 | ºC | |