myالوثائق الفنية
Acrylonitrile butadiene styrene (ABS) /Polybutylene Terephthalate (PBT) alloy with 20% Glass Fiber. It is suitable for processing through injection molding.
تفاصيل مركب
CAS
9003-56-9, 65997-17-3, 24968-12-5 ;9003-54-7
تطبيقات
صناعة
منتج
مزايا
- General Purpose
تطبيقات أخرى
Electric & Electronic Products (Speaker Frame)
معلومات تقنية
| كمية | قدر | وحدة | التعلیق |
|---|---|---|---|
| dry Time | 4 - 5 | hr | |
| الخصائص الفيزيائية | |||
| Melting range | 240 - 250 | ºC | |
| Humidity | <0.02 | % | |
| Linear Mold Shrinkage | 0.0040 - 0.0090 | cm/cm | ASTM D955;(Flow), 3.2mm |
| Specific Gravity | 1.35 | ASTM D792 | |
| الخصائص الحرارية | |||
| Heat Deflection temperature | 160 | ºC | ASTM D648;6.4mm;(Unannealed);at 1.8 MPa |
| Heat Deflection temperature | 195 | ºC | ASTM D648;6.4mm;(Unannealed);at 0.46 MPa |
| Melting point | 225 | ºC | Peak at Break |
| خصائص ميكانيكية | |||
| Izod impact strength (notched) | 63.7 | J/m | ASTM D256;23℃;3.2mm |
| Flexural modulus-MD | 5690 | MPa | ASTM D790;1.3mm/min;3.2mm |
| Flexural strength | 142 | MPa | ASTM D790;1.3mm/min;3.2mm;Yield |
| Elongation at break-MD | 3 | % | ASTM D638;5mm/min;3.2mm |
| Tensile Stress at yield-MD | 93.2 | MPa | ASTM D638;5mm/min;3.2mm |
| خصائص العملية | |||
| Drying Temperature | 100 | ºC | |
| Mold Temperature | 60 - 80 | ºC | |
| Middle Barrel Temperature | 230 - 245 | ºC | |