الوثائق الفنية
Razamid® A121U-50 is a black colored, impact modified polyamide 66 grade. It is suitable for processing by injection molding. Used in automotive, electrical, construction and recreational applications.
تفاصيل
نوع المنتج
تطبيقات
منتج
التركيب الكيميائي
PA 66 (Nylon 66)
مزايا
- good strength
- good stiffness
- good toughness
- high melting point
- low specific weight
- excellent heat-, chemical and abrasion resistance
- impact modified
تطبيقات أخرى
Automotive
Buildings & constructions
Electrical markets > Electrical components
Recreational applications
معاملة
Meets with the requirements of ISO/TS16949:2002 and ISO9001:2000 standards.
معلومات تقنية
كمية | قدر | وحدة | التعلیق |
---|---|---|---|
Processing Temperature | 275 - 310 | ºC | |
dry Time | 2 - 4 | hr | |
خصائص المظهر | |||
Appearance | Black | ||
الخصائص الفيزيائية | |||
Shrinkage | 0.8 | % | ASTM D955; Linear |
Density | 1.13 | g/ml | ASTM D792 |
الخصائص الحرارية | |||
Heat Deflection temperature | 80 | ºC | ASTM D648;at 1.8 MPa |
Heat Deflection temperature | 215 | ºC | ASTM D648;at 0.46 MPa |
Vicat softening temperature | 225 | ºC | ASTM D1525 |
Melting point | 250 | ºC | ASTM D3418 |
خصائص ميكانيكية | |||
Flexural modulus-MD | 1900 | MPa | ASTM D790 |
(Izod impact strength(notched | 60 | kJ/m² | ASTM D256; at 23°C |
Flexural strength | 75 | MPa | ASTM D790 |
Elongation at break-MD | 40 | % | ASTM D638 |
Tensile Stress at yield-MD | 55 | MPa | ASTM D638 |
الخواص الكهربائية | |||
Surface Resistance | 1.00e+12 | ohm | IEC 60093 |
Volume resistance | 1.00e+13 | ohm-cm | IEC 60093 |
Dielectric Strength | 20 | Kv/mm | ASTM D149 |
خصائص العملية | |||
Mold Temperature | 50 - 80 | ºC | |
Middle Barrel Temperature | 265 - 300 | ºC | |
Drying Temperature | 90 - 110 | ºC |
اتصل بالمورد
للاتصال الموردين من هذه الماد وتسجيل طلب للحصول على سعر، عينة، التشاور أو قبل الفاتورة، يرجى ملء استمارة الطلب.