الوثائق الفنية
Razamid® A121U GR20-50 is a black colored, impact modified polyamide 66 resin reinforced with 20% glass fiber. It is suitable for processing by injection molding. Used in automotive and electrical industries.
تفاصيل مركب
نوع المنتج
تطبيقات
منتج
التركيب الكيميائي
PA 66 (Nylon 66)
مزايا
- good strength
- good stiffness
- good toughness
- high melting point
- low specific weight
- excellent heat-, chemical and abrasion resistance
- impact modified
تطبيقات أخرى
Automotive> under the hood applications
Electrical markets > Electrical components> contactors, fuses and terminals
معاملة
Meets with the requirements of ISO/TS16949:2002 and ISO9001:2000 standards.
معلومات تقنية
كمية | قدر | وحدة | التعلیق |
---|---|---|---|
Processing Temperature | 275 - 310 | ºC | |
dry Time | 2 - 4 | hr | |
خصائص المظهر | |||
Appearance | Black | ||
الخصائص الفيزيائية | |||
Shrinkage | 0.5 - 1 | % | ASTM D955; Linear |
Density | 1.3 | g/ml | ASTM D792 |
الخصائص الحرارية | |||
Heat Deflection temperature | 255 | ºC | ASTM D648;at 0.46 MPa |
Vicat softening temperature | 240 | ºC | ASTM D1525 |
Melting point | 260 | ºC | ASTM D3418 |
خصائص ميكانيكية | |||
(Izod impact strength(notched | 12 | kJ/m² | ASTM D256; at 23°C |
Flexural modulus-MD | 5900 | MPa | ASTM D790 |
Flexural strength | 160 | MPa | ASTM D790 |
Tensile Stress at yield-MD | 95 | MPa | ASTM D638 |
Elongation at break-MD | 3.5 | % | ASTM D638 |
الخواص الكهربائية | |||
Volume resistance | 1.00e+13 | ohm-cm | IEC 60093 |
Surface Resistance | 1.00e+12 | ohm | IEC 60093 |
Dielectric Strength | 13 | Kv/mm | ASTM D149 |
خصائص العملية | |||
Mold Temperature | 50 - 80 | ºC | |
Middle Barrel Temperature | 265 - 300 | ºC | |
Drying Temperature | 100 - 120 | ºC |
اتصل بالمورد
للاتصال الموردين من هذه الماد وتسجيل طلب للحصول على سعر، عينة، التشاور أو قبل الفاتورة، يرجى ملء استمارة الطلب.