Trogamid® CX9701 Transparent Nylon

الوثائق الفنية

TROGAMID® CX compounds round off the product range of High Performance Polymers to include semi-crystalline polyamides, the crystallites of which are so small that they do not scatter visible light-a property known as microcrystallinity. The compounds are therefore as clear as glass. Areas of application can be as diverse as water management, filter technology, laboratory and medical technology, the manufacture of eyeglasses, or bottles for the cosmetics industry.Specific Notes for this Material: Highly viscous, permanently transparent polyamide for extrusion, with an external mold release agent.

تفاصيل

نوع المنتج

البوليمر > البلاستيك

تطبيقات

صناعة البوليمرات
صناعة البوليمرات > قذف ضربة صب

صناعة

المياه ومياه الصرف الصحي
مستحضرات التجميل
الغرض الطبي

منتج

Evonik

المورد

إيفونيك إيران

التركيب الكيميائي

microcrystallinity semi-crystalline polyamides

مزايا
  • crystal-clear
  • permanent transparency
  • high transmission
  • superior chemical resistance
  • stress cracking resistance
  • high level of UV resistance
  • low water absorption
  • high dimensional stability
  • balanced mechanical property profile
  • high impact resistance, even at low temperatures
  • high level of dynamic strength (e.g., for internally pressurized parts)
  • abrasion and scratch resistance
  • high glass transition temperature
  • very low isotropic shrinkage
  • easy processing
  • High Performance
تطبيقات أخرى

filter technology
laboratory and medical technology
the manufacture of eyeglasses
bottles for the cosmetics industry

معلومات تقنية

كمية قدر وحدة التعلیق
الخصائص الفيزيائية
Density 1.02 g/ml ISO 1183
الخصائص الحرارية
Glow WireTest 850 ºC IEC 60695-2-1/0-3, Thickness 1 mm
Maximum Service Temperature 100 ºC Temperature Index (Criterion: stress and yield); IEC 216
Heat Deflection temperature 110 ºC (ISO 75-1/2, 1.8 MPa (264 psi
Glass transition Temperature 140 ºC Tg, 10 K/min
Heat Deflection temperature 126 ºC (ISO 75-1/2, 0.46 MPa (66 psi
Thermal Expansion 90 µm/m-°C Longitudinal; ISO 11359, Temperature 23-80 °C, linear
Flameability Thickness 1.6 mm , UL94
Vicat softening temperature 129 ºC 50N; ISO 306
Flameability Thickness 0.8 mm, UL94
Melting point 250 ºC 10K/min
Vicat softening temperature 136 ºC 10N; ISO 306
Thermal Expansion 90 µm/m-°C Transverse to Flow, ISO 11359, Temperature 23-80 °C
خصائص ميكانيكية
Tensile strength 60 MPa at Yield, 50 mm/min ; ISO 527-1/2
Tensile strength >50 MPa 50mm/min ; ISO 527-1/2, at Break
Elongation at break-MD >150 % 50mm/min ; ISO 527-1/2
Creep modulus 700 MPa ISO 899-1,1000 hour
Hardness Shore D 81 ISO 868
Flexural strength 90 MPa 5mm/min; ISO 178
Flexural strength 50 MPa 5mm/min, at 3.5% Strain; ISO 178
Flexural modulus-MD 1700 MPa ISO 178
(Charpy Impact Strength(unnotched 99990 kJ/m² ISO 179/1eU, Temperature 0 °C
(Charpy Impact Strength(unnotched 99990 kJ/m² ISO 179/1eU, Temperature -30°C
(Charpy Impact Strength(unnotched 99990 kJ/m² ISO 179/1eU, Temperature 23°C
Ball indentation Hardness 108 MPa H30; ISO 2039-1
Tensile strength >50 MPa
Tensile modulus-MD 1500 MPa ISO 527-1/2
Charpy Impact Strength (notched) 17 kJ/m² ISO 179/1eA, Temperature 0 °C
Elongation at yield 9 % 5mm/min, Outer fiber strain at maximum stress; ISO 178
Charpy Impact Strength (notched) 16 kJ/m² ISO 179/1eA, Temperature -30°C
Charpy Impact Strength (notched) 18 kJ/m² ISO 179/1eA, Temperature 23°C
Elongation at yield 8 % 50mm/min ; ISO 527-1/2
viscosity number 180 - 200 ml/g ISO 307
Creep modulus 1400 MPa ISO 899-1,1 hour
الخواص الكهربائية
Dissipation Factor IEC 60250 DIN VDE 0303-Part 4, Frequency 100 Hz
Dissipation Factor IEC 60250 DIN VDE 0303-Part 4, Frequency 1000000 Hz
Dielectric Constant 3.2 IEC 60250 DIN VDE 0303-Part 4, Frequency 1000000 Hz
Dielectric Strength 27 Kv/mm K20/P50; IEC 60243-1
Dielectric Constant 3.6 IEC 60250 DIN VDE 0303-Part 4, Frequency 100 Hz
Surface Resistance >1.000E+013 ohm IEC 60093
Surface Resistance >1.000E+015 ohm Spec.; IEC 60093
Comparative Tracking Index 575 V Test Solution A, 100 drops; IEC 60112
Volume resistance >1.000E+017 ohm-cm IEC 60093