Technical Documents
ABS ER451 is a high gloss, heat resistant acrylonitrile butadiene styrene(ABS) grade. It is suitable for processing through injection molding.
Details
Product Type
Applications
Industry
Producer
Advantages
- scratch resistance
- enables cost reduction
- high gloss
- heat resistant
Other Applications
Automotive > External - Mirror housing
Automotive > Lighting - Housings
Electronics / Computers > Monitors
Electronics / Computers > TV/ TV housings
housings for electric and electronic products such as DVDs, audios, air cleaners
Technical data
Quantity | Value | Unit | Comment |
---|---|---|---|
dry Time | 3 - 4 | hr | |
Appearance Properties | |||
Physical state | Pill | ||
Physical Properties | |||
Melting range | 220 - 240 | ºC | |
Humidity | <0.01 | % | |
MFI | 15 | g/10min | ASTM D1238;220℃/10kg |
Shrinkage | 0.4 - 0.7 | % | ASTM D955;(Flow), 3.2mm |
Specific Gravity | 1.05 | ASTM D792 | |
Thermal Properties | |||
UL RTI | 60 | ºC | UL 746B;Electrical |
UL RTI | 60 | ºC | UL 746B;Mechanical with Impact |
UL RTI | 60 | ºC | UL 746B;Mechanical without Impact |
Vicat softening temperature | 99 | ºC | ASTM D1525;5kg, 50℃/h |
Flameability | UL94 | ||
Heat Deflection temperature | 99 | ºC | ASTM D648;6.4mm;(Unannealed);4.6kg |
Heat Deflection temperature | 91 | ºC | ASTM D648;6.4mm;(Unannealed);18.6kg |
Mechanical Properties | |||
Izod impact strength (notched) | 117.7 | J/m | ASTM D256;-30℃;3.2mm |
Rockwell Hardness | 108 | ASTM D785;R-Scale | |
Izod impact strength (notched) | 274.6 | J/m | ASTM D256;23℃;3.2mm |
Izod impact strength (notched) | 98.07 | J/m | ASTM D256;-30℃;6.4mm |
Izod impact strength (notched) | 245.2 | J/m | ASTM D256;23℃;6.4mm |
Flexural strength | 77.47 | MPa | ASTM D790;15mm/min;3.2mm |
Flexural modulus-MD | 2550 | MPa | ASTM D790;15mm/min;3.2mm |
Elongation at break-MD | 25 | % | ASTM D638;50mm/min;3.2mm |
Tensile Stress at yield-MD | 48.05 | MPa | ASTM D638;50mm/min;3.2mm |
Electrical Properties | |||
Comparative Tracking Index | V | Solution A IEC 60112 | |
Volume resistance | 1.4E+01 | ohm-cm | ℃23;ASTM D257 |
Arc Resistance | 6 | s | ℃23;ASTM D495 |
Dielectric Strength | 30 | Kv/mm | ℃23;ASTM D149;1mm |
Process Properties | |||
Mold Temperature | 40 - 60 | ºC | |
Middle Barrel Temperature | 210 - 230 | ºC | |
Drying Temperature | 80 - 90 | ºC |