Technical Documents
AEROSIL® R 202 is a hydrophobic fumed silica surface-treated with polydimethylsiloxane. Used in adhesives and sealants.
Details
67762-90-7
Hydrophobic Fumed Silica
- The silicone oil treatment guarantees the marked hydrophobia of the product
- Highly efficient effect in the thickening and thixotropy of complex polar liquids, such as those based on epoxy, polyurethane, or vinylester resins
- Improves the water resistance of moisture-sensitive formulations, such as cosmetic preparations
- Improvement of the anti-settling behavior of pigments and anti-sagging behavior in 2-C epoxy coatings.
- With silicone oil treatment, AEROSIL® R 202 offers a tailor-made chemical surface treatment.
- Due to its excellent electrical insulating ability and low water absorption, this hydrophobized, small-particle silica easily acquires and conserves electrical charge
- It is typically used as a surface additive for toner particles in order to increase charge and improve flowability.
- The high hydrophobicity of PDMS-treated, small particle AEROSIL® grades makes them particularly effective for achieving a high tribo-charge.
- The slightly oily effect of the PDMS treatment provides additional benefits in some printing processes.
Thickening and thixotropy control of adhesives and sealants for fiberoptic cables
Thickening and thixotropy control of epoxy and vinylester resins and gelcoats
Thickening and thixotropy control of cable gels, lubricants, and cosmetic formulations
Booster silica for defoamer formulations
Anti-sedimentation aid for fillers, such as chalk or quartz powder
Additive for formulation of anti-corrosion systems
Improves flowability of powders
We recommend to store the product in closed containers under dry conditions and to protect the material from volatile substances. Aerosil® R 202 should be used within 2 years after production.
Technical data
Quantity | Value | Unit | Comment |
---|---|---|---|
Physical Properties | |||
Tap density | 0.06 | g/cm3 | ISO 787-11 |
Surface Area | 80 - 120 | m²/g | BET |
SiO2 | >99 | % | based on ignited material |
pH | 4 - 6 | in 4% dispersion | |
Humidity | <0.5 | % | |
Thermal Properties | |||
Loss on ignition | 4 - 6 | % | |
Chemical Properties | |||
Carbon percentage | 3.5 - 5 | % | |
Loss on drying | <0.5 | % | 2hours at 105°C |