myTechnical Documents
Thermoplastic, low viscosity plastic resin for injection molding, compression molding and extrusion.
Details
Product Type
Applications
Producer
Supplier
Other Applications
Wire and cable jacketing
Technical data
| Quantity | Value | Unit | Comment |
|---|---|---|---|
| Physical Properties | |||
| Density | 1.78 | g/ml | |
| MFI | 15 | g/10min | |
| Thermal Properties | |||
| Thermal Expansion | 100 | µm/m-°C | Parallel to Flow@Temperature 20.0 °C |
| Thermal Expansion | 100 | µm/m-°C | Transverse to Flow@Temperature 20.0 °C |
| Heat Deflection temperature | 70 | ºC | at 1.8 MPa |
| Heat Deflection temperature | 130 | ºC | at 0.46 MPa |
| Vicat softening temperature | 166 | ºC | 50°C/hr/50 N |
| Flameability | @Thickness 1.60 mm | ||
| Mechanical Properties | |||
| (Charpy Impact Strength(unnotched | 210 | kJ/m² | @Temperature -30.0 °C |
| Elongation at break-MD | > 50 | % | |
| Tensile strength | 55.0 | MPa | |
| Tensile modulus-MD | 2100 | MPa | |
| Elongation at yield | 8.0 | % | |
| (Charpy Impact Strength(unnotched | 260 | kJ/m² | |
| Charpy Impact Strength (notched) | 13 | kJ/m² | |
| Charpy Impact Strength (notched) | 6 | kJ/m² | @Temperature -30.0 °C |
| Tensile Impact strength | 140 | Kj/m² | |
| Creep modulus | 1600 | MPa | 1hour |
| Creep modulus | 950 | MPa | 1000hours |
| Chemical Properties | |||
| Water absorption | 0.00 | % | |
| Electrical Properties | |||
| Dielectric Strength | 22.0 | Kv/mm | |
| Dielectric Constant | 9 | @Frequency 100 Hz | |
| Dielectric Constant | 8.0 | @Frequency 1e+6 Hz | |
| Dissipation Factor | 0.034 | @Frequency 100 Hz | |
| Electrical Resistivity | 3.00e+13 | ohm-cm | |
| Surface Resistance | > 1.00e+15 | ohm | |
| Dissipation Factor | 0.24 | @Frequency 1e+6 Hz | |
| Comparative Tracking Index | 275 | V | |