myInjection Molding, PC/ABS, High Gloss, Heat Resistance, High Flow
Details
Producer
Technical data
| Quantity | Value | Unit | Comment |
|---|---|---|---|
| Physical Properties | |||
| Humidity | <2 | % | |
| Specific Gravity | 1.14 | ||
| Linear Mold Shrinkage | 0.005 - 0.008 | cm/cm | |
| MFI | 7.5 | g/10min | 250°C/2.16Kg |
| Thermal Properties | |||
| UL RTI | 60 | ºC | Mechanical without Impact-Thickness 3- mm |
| UL RTI | 60 | ºC | Mechanical with Impact-Thickness 1.5- mm |
| UL RTI | 60 | ºC | Mechanical with Impact-Thickness 3- mm |
| UL RTI | 60 | ºC | Electrical-Thickness 1.5- mm |
| UL RTI | 60 | ºC | Electrical-Thickness 3- mm |
| Heat Deflection temperature | 114 | ºC | |
| Dry Time | 240 - 360 | min | |
| UL RTI | 60 | ºC | Mechanical without Impact-Thickness 1.5- mm |
| Flameability | Thickness 1.5- mm | ||
| Flameability | Thickness 3- mm | ||
| Mechanical Properties | |||
| Rockwell Hardness | 116 | ||
| Izod impact strength (notched) | 539 | J/m | Temperature 23 °C |
| Flexural modulus-MD | 2255.53 | MPa | Thickness 3.2 mm |
| Flexural strength | 91.20 | MPa | Thickness 3.2 mm |
| Tensile strength | 59.82 | MPa | Thickness 3.2 mm |
| Elongation at break-MD | >100 | % | Thickness 3.2 mm |
| Process Properties | |||
| Middle Barrel Temperature | 245 - 275 | ºC | |
| Mold Temperature | 50 - 70 | ºC | |
| Drying Temperature | 80 - 100 | ºC | |