myInjection Molding, PC/ABS, General Purpose, Metal Plating.
Details
CAS
103598-77-2 , 9003-56-9
Producer
Other Applications
Automotive (Exterior)
Technical data
| Quantity | Value | Unit | Comment |
|---|---|---|---|
| Physical Properties | |||
| Humidity | <0.02 | % | injection molding |
| Specific Gravity | 1.1 | ASTM D792 | |
| Linear Mold Shrinkage | 0.005 - 0.008 | cm/cm | ASTM D955 |
| MFI | 5.5 | g/10min | ASTM D 1238 , Temperature 250 °C -Load 2.16 kg |
| Melting range | 240 - 265 | ºC | injection molding |
| Thermal Properties | |||
| UL RTI | 60 | ºC | Electrical-Thickness 1.6- mm |
| Dry Time | 240 - 360 | min | Injection Molding |
| UL RTI | 60 | ºC | Electrical-Thickness 3- mm |
| UL RTI | 60 | ºC | Mechanical with Impact-Thickness 1.6- mm |
| UL RTI | 60 | ºC | Mechanical with Impact-Thickness 3- mm |
| UL RTI | 60 | ºC | Mechanical without Impact-Thickness 1.6- mm |
| UL RTI | 60 | ºC | Mechanical without Impact-Thickness 3- mm |
| Flameability | Thickness 1.6- mm | ||
| Flameability | Thickness 3- mm | ||
| Mechanical Properties | |||
| Flexural modulus-MD | 1912.29 | MPa | ASTM D 790 |
| Flexural strength | 71.58 | MPa | ASTM D 790 |
| Tensile strength | 46.09 | MPa | ASTM D638 |
| Elongation at break-MD | >100 | % | ASTM D638 |
| Process Properties | |||
| Middle Barrel Temperature | 235 - 265 | ºC | injection molding |
| Drying Temperature | 80 - 90 | ºC | injection molding |
| Mold Temperature | 50 - 70 | ºC | injection molding |