myRazamid®B111 GR35 is a natural colored polyamide (PA)6 resin reinforced with 35% glass fiber. It is suitable for processing by injection molding. Used in automotive and electrical industries.
Details Compound
Product Type
Reinforced with
Applications
Producer
Chemical Composition
PA 6 (Nylon 6)
Advantages
- good strength
- good stiffness
- good toughness
- high melting point
- low specific weight
- excellent heat-, chemical and abrasion resistance
Other Applications
Automotive> under the hood applications
Electrical markets > Electrical components> contactors, fuses and terminals
Handling
Meets with the requirements of ISO/TS16949:2002 and ISO9001:2000 standards.
Technical data
| Quantity | Value | Unit | Comment |
|---|---|---|---|
| dry Time | 2 - 4 | hr | |
| Processing Temperature | 270 - 290 | ºC | |
| Appearance Properties | |||
| Appearance | Natural colors | ||
| Physical Properties | |||
| Shrinkage | 0.7 | % | ASTM D955; Linear |
| Density | 1.41 | g/ml | ASTM D792 |
| Thermal Properties | |||
| Vicat softening temperature | 210 | ºC | ASTM D1525 |
| Melting point | 225 | ºC | ASTM D3418 |
| Heat Deflection temperature | 212 | ºC | ASTM D648;at 1.8 MPa |
| Heat Deflection temperature | 220 | ºC | ASTM D648;at 0.46 MPa |
| Mechanical Properties | |||
| (Izod impact strength(notched | 18 | kJ/m² | ASTM D256; at 23°C |
| Flexural modulus-MD | 10500 | MPa | ASTM D790 |
| Flexural strength | 280 | MPa | ASTM D790 |
| Elongation at break-MD | 3 | % | ASTM D638 |
| Tensile Stress at yield-MD | 195 | MPa | ASTM D638 |
| Electrical Properties | |||
| Surface Resistance | 1.00e+12 | ohm | IEC 60093 |
| Volume resistance | 1.00e+13 | ohm-cm | IEC 60093 |
| Dielectric Constant | 3.8 | ASTM D150 | |
| Dielectric Strength | 18 | Kv/mm | ASTM D149 |
| Process Properties | |||
| Middle Barrel Temperature | 240 - 260 | ºC | |
| Drying Temperature | 80 - 100 | ºC | |
| Mold Temperature | 80 - 90 | ºC | |
Contact Supplier
To contact the suppliers of this material and register a request for a price, sample, consultation or pre-invoice, please complete the application form.