Technical Documents
VESTAKEEP 2000 CF30 is a medium-viscosity, carbon fiber-reinforced (30%) polyether ether ketone for injection molding.
Details Compound
Product Type
Reinforced with
Producer
Supplier
Advantages
- superior thermal and chemical resistance
- self-extinguishing
- can be processed by common injection molding machines for thermoplastics
Handling
VESTAKEEP®2000 CF30 is supplied as granules in 25 kg boxes with moisture–proof poly-ethylene liners.
Technical data
Quantity | Value | Unit | Comment |
---|---|---|---|
Physical Properties | |||
MVR | 10 | ml/10min | ISO 1133 @Load 5.0 kg,Temperature 380 °C |
Shrinkage | 0.0 | % | ISO 294-4; sheet with film gate at rim, mold temperature1 80°C @Thickness 2.00 mm; in flow direction |
Melting range | 380 - 400 | ºC | during the injection molding process. |
Density | 1.38 | g/ml | ISO 1183@Temperature 23°C |
Shrinkage | 0.40 | % | ISO 294-4; sheet with film gate at rim, mold temperature1 80°C @Thickness 2.00 mm; in transverse direction |
Thermal Properties | |||
Glow WireTest | 875 | ºC | IEC 60695-2-12/13 @Thickness 2mm; GWIT |
Melting point | ºC | ISO 11357; DSC; 2nd heating | |
Flameability | IEC 60695@Thickness 1.60 mm | ||
Vicat softening temperature | 343 | ºC | 10N; ISO 306 |
Heat Deflection temperature | 330 | ºC | ISO 75-1/2;at 1.8 MPa |
Vicat softening temperature | 340 | ºC | 50N; ISO 306 |
Thermal Expansion | 10 | µm/m-°C | Longitudinal; ISO 11359@Temperature 23.0 -55.0 °C |
Heat Deflection temperature | 340 | ºC | ISO 75-1/2;at 0.45 MPa |
Glow WireTest | 960 | ºC | IEC 60695-2-12/13 @Thickness 2mm; GWFI |
Mechanical Properties | |||
Charpy Impact Strength (notched) | 9 | kJ/m² | ISO 179/1eA@Temperature 23°C |
Tensile strength | 240 | MPa | ISO 527-1/2 |
Charpy Impact Strength (notched) | 8 | kJ/m² | ISO 179/1eA@Temperature -30°C |
Tensile modulus-MD | 23000 | MPa | ISO 527-1/2 |
(Charpy Impact Strength(unnotched | 45 | kJ/m² | ISO 179/1eU@Temperature -30°C |
Strain at break-MD | 2 | % | ISO 527-1/2 |
(Charpy Impact Strength(unnotched | 45 | kJ/m² | ISO 179/1eU@Temperature 23°C |
Electrical Properties | |||
Volume resistance | 1.00e+6 | ohm-cm | IEC 60093 |
Surface Resistance | 1.00e+5 | ohm | IEC 60093 |
Process Properties | |||
Mold Temperature | 160 - 200 | ºC | preferably 180°C |