Vestamid® EX9200 Heat & Light Stabilized Nylon 12/PEBA Elastomer

Technical Documents

PA 12 elastomers . Applications: decorative and protective films for sports articles and interior/exterior designs on automobilesInformation provided by degussa.

Details

Product Type

Polymer > Synthetic rubbers
Polymer > Polyamides

Applications

Polymers industry > Blown film
Polymers industry > Extrusion profiles sheet
Polymers industry
Polymers industry > Injection moulding

Producer

Evonik

Supplier

Evonik Iran

Chemical Composition

thermoplastic elastomers

Advantages
  • low density
  • highly resistant to chemicals and solvents
  • easy to process and color and are easy to overmold
  • can be decorated easily by means of heat transfer printing
  • excellent impact strength at low temperatures
  • Their hardness and flexibility can be varied over a wide range.
  • high elasticity and good recovery
  • Their mechanical properties are only slightly temperature-dependent.
  • They are free of volatile or migrating plasticizers.
Other Applications

decorative and protective films for sports articles and interior/exterior designs on automobilesInformation provided by degussa.

Technical data

Quantity Value Unit Comment
Physical Properties
Density 1.01 g/ml ISO 1183
Thermal Properties
Heat Deflection temperature 45 ºC ISO 75-1; at 1.8 MPa
Heat Deflection temperature 100 ºC ISO 75-2; at 0.46 MPa
Vicat softening temperature 170 ºC 10N; ISO 306
Thermal Expansion 160 µm/m-°C ISO 11359-2 @Temperature 23.0 -55.0 °C; Transverse
Thermal Expansion 50 µm/m-°C Transverse to Flow@Temperature 23.0 -55.0 °C
Thermal Expansion 160 µm/m-°C Longitudinal; ISO 11359@Temperature 23.0 -55.0 °C;
Flameability IEC 60695@1.6 mm
Vicat softening temperature 130 ºC 50N; ISO 306
Mechanical Properties
Tensile strength 27 MPa 50%Modulus (Tensile stress at 50%elongation);ISO 527-1, ISO 527-2
Hardness Shore D 68 ISO 868
Tensile strength 27 MPa at 50% Strain;ISO 527-2
Elongation at yield 19 % ISO 527-1, ISO 527-2
viscosity number 190 ml/g ISO 307
Charpy Impact Strength (notched) 33 kJ/m² ISO 179/1eA@Temperature 23.0 °C ;Partial Break
(Charpy Impact Strength(unnotched kJ/m² ISO 179/1eU@Temperature -30.0 °C
Tensile modulus-MD 700 MPa ISO 527-1, ISO 527-2
Elongation at break-MD >200 % ISO 527-1, ISO 527-2
Tensile Stress at yield-MD 31 MPa ISO 527-1, ISO 527-2
(Charpy Impact Strength(unnotched kJ/m² ISO 179/1eU@Temperature 23.0 °C
Charpy Impact Strength (notched) 6 kJ/m² ISO 179/1eA@Temperature -30.0 °C
Chemical Properties
Water absorption 1.5 % ISO 62; at Saturation
Electrical Properties
Comparative Tracking Index 600 V Test Solution A; IEC 60112
Surface Resistance 1.00e+13 ohm Spec.; IEC 60093
Dissipation Factor 0.15 IEC 60250 @100 Hz
Dielectric Constant 7.4 IEC 60250 @100 Hz
Dielectric Constant 4.6 IEC 60250 @ 1e+6 Hz
Dielectric Strength 30.0 Kv/mm K20/P50; IEC 60243-1
Volume resistance 1.00e+11 ohm-cm Spec.; IEC 60093
Dissipation Factor 0.076 IEC 60250 @ 1e+6 Hz