Vestamid® LX9012 Nylon 12

VESTAMID® LX9012 has especially been developed for the extrusion and co-extrusion of ski upper and decorative films.

Product Type

Applications

Producer

Evonik

Supplier

Evonik Iran

Advantages

Other Applications

ski upper and decorative films
decoration on the bottom side of injection molded sports shoe soles

Quantity	Value	Unit	Comment
Physical Properties
Density	1.01	g/ml	ISO 1183
Shrinkage	1.0	%	ISO 294-4,2577; parallel
Shrinkage	1.4	%	ISO 294-4,2577; normal
Thermal Properties
Vicat softening temperature	130	ºC	50°C/hr/50 N; ISO 306
Melting point	176	ºC	10°C/min; ISO 11357-1/-3
Heat Deflection temperature	45	ºC	ISO 75-1/-2;at 1.8 MPa
Heat Deflection temperature	120	ºC	ISO 75-1/-2;at 0.45 MPa
Dry Time	480 - 960	min
Flameability			IEC 60695-11-10@Thickness 3.2 mm
Flameability			IEC 60695-11-10@Thickness 1.60 mm
Mechanical Properties
(Charpy Impact Strength(unnotched		kJ/m²	ISO 179/1eU@Temperature 23.0 °C
Charpy Impact Strength (notched)	19	kJ/m²	ISO 179/1eA@Temperature 23.0 °C
Tensile modulus-MD	1100	MPa	ISO 527-1/-2
(Charpy Impact Strength(unnotched		kJ/m²	ISO 179/1eU@Temperature -30.0 °C
Elongation at yield	5	%	ISO 527-1/-2
Yield Stress -MD	37	MPa	ISO 527-1/-2
Strain at break-MD	>50	%	ISO 527-1/-2
Charpy Impact Strength (notched)	15	kJ/m²	ISO 179/1eA@Temperature -30.0 °C
Chemical Properties
Moisture absorption	0.8	%	Sim. to ISO 62
Water absorption	1.5	%	Sim. to ISO 62
Electrical Properties
Volume resistance	1.00e+12	ohm-cm	IEC 60093
Dissipation Factor	0.053		IEC 60250 @100 Hz
Relative permittivity	3.8		IEC 60250 @100 Hz
Dissipation Factor	0.028		IEC 60250 @ 1 MHz
Dielectric Strength	36	Kv/mm	IEC 60243-1
Relative permittivity	3.0		IEC 60250 @ 1 MHz
Process Properties
Drying Temperature	80	ºC
Mold Temperature	80	ºC	Injection molding