Technical Documents
An acrylonitrile butadiene styrene (ABS) grade. It is suitable for processing through injection molding.
Details
CAS
25120-20-1, 9003-56-9, 25747-74-7, ;31621-07-5
Product Type
Applications
Industry
Producer
Other Applications
Electric & Electronic Housing
Technical data
Quantity | Value | Unit | Comment |
---|---|---|---|
dry Time | 3 - 4 | hr | |
Physical Properties | |||
Melting range | 230 - 250 | ºC | |
Humidity | <0.01 | % | |
MFI | 6 | g/10min | ASTM D1238;220℃/10kg |
Linear Mold Shrinkage | 0.0040 - 0.0070 | cm/cm | ASTM D955;(Flow), 3.2mm |
Specific Gravity | 1.07 | ASTM D792 | |
Thermal Properties | |||
Flameability | UL94;Thickness >=1.50 mm | ||
Flameability | UL94;Thickness >=3.00 mm | ||
UL RTI | 60 | ºC | UL 746B;Thickness >=3.00 mm;Mechanical without Impact |
UL RTI | 60 | ºC | UL 746B;Thickness >=1.50 mm;Mechanical without Impact |
UL RTI | 60 | ºC | UL 746B;Thickness >=1.50 mm;Mechanical with Impact |
UL RTI | 60 | ºC | UL 746B;Thickness >=3.00 mm;Mechanical with Impact |
UL RTI | 60 | ºC | UL 746B;Thickness >=3.00 mm;Electrical |
UL RTI | 60 | ºC | UL 746B;Thickness >=1.50 mm;Electrical |
Vicat softening temperature | 111 | ºC | ASTM D1525;5kg, 50℃/h |
Heat Deflection temperature | 104 | ºC | Unannealed; ASTM D648;Thickness 6.40 mm;at 1.8 MPa |
Heat Deflection temperature | 113 | ºC | Unannealed; ASTM D648;Thickness 6.40 mm;at 0.46 MPa |
Mechanical Properties | |||
Izod impact strength (unnotched) | 78.5 | J/m | ASTM D256;-30℃;3.2mm |
Izod impact strength (unnotched) | 78.5 | J/m | ASTM D256;-30℃;6.4mm |
Izod impact strength (notched) | 167 | J/m | ASTM D256;23℃;3.2mm |
Izod impact strength (notched) | 157 | J/m | ASTM D256;23℃;6.4mm |
Flexural modulus-MD | 2450 | MPa | ASTM D790;15mm/min;3.2mm |
Flexural strength | 77.5 | MPa | ASTM D790;15mm/min;3.2mm;Yield |
Elongation at break-MD | 20 | % | ASTM D638;50mm/min;3.2mm |
Tensile Stress at yield-MD | 47.1 | MPa | ASTM D638;50mm/min;3.2mm |
Rockwell Hardness | 111 | ASTM D785;Rockwell R | |
Process Properties | |||
Middle Barrel Temperature | 220 - 240 | ºC | |
Mold Temperature | 60 - 80 | ºC | |
Drying Temperature | 80 - 90 | ºC |