VESTAKEEP® 4000 FC30

کمیت	مقدار	واحد	توضیحات
خواص ظاهری
Physical state	قرصی شکل
خواص فیزیکی
MFI	3.62	g/10min	380°C/5 kg- ISO 1133
Density	1.45	g/ml	ISO 1183- 23°C
Shrinkage	0.2	%	ISO 294-4, 2 mm, Flow
Shrinkage	0.4	%	ISO 294-4, 2 mm, Transverse
Melting range	370 - 380	ºC
خواص حرارتی
Glass transition Temperature	152	ºC
Flameability	V-0 Class		UL 94, 1.6 mm
Heat Deflection temperature	310	ºC	ISO 75-1, 1.8 MPa, Method A
Vicat softening temperature	340	ºC	ISO 306, 10N, Method A
Heat Deflection temperature	330	ºC	ISO 75-1, 0.45 MPa, Method B
Melting point	340	ºC	ISO 11357, DSC - 2nd heating
Vicat softening temperature	335	ºC	ISO 306, 50N, Method B
Dry Time	240	min
خواص مکانیکی
(Charpy Impact Strength(unnotched	45	kJ/m²	ISO 179/1eU, 23°C, Complete break
(Charpy Impact Strength(unnotched	45	kJ/m²	ISO 179/1eU, -30°C, Complete break
Charpy Impact Strength (notched)	8	kJ/m²	ISO 179/1eA, 23°C, Complete break
Strain at break-MD	2	%	ISO 527-2
Tensile Stress at yield-MD	140	MPa	ISO 527-1
Tensile modulus-MD	11500	MPa	ISO 527-1
Charpy Impact Strength (notched)	7	kJ/m²	ISO 179/1eA, -30°C, Complete break
خواص شیمیایی
LOI	44	%	ISO 4589, 3.2 mm
Water absorption	0.4	%	ISO 62, 23°C
خواص الکتریکی
Surface Resistance	10^5	ohm	IEC 60093
Volume resistance	10^7×10^11	ohm-cm	IEC 60093
Dissipation Factor	0.02		IEC 60250, 1 MHz
Relative permittivity	6.1		IEC 60250, 50 Hz
Relative permittivity	4.9		IEC 60250, 1 MHz
خواص فرایندی
Mold Temperature	160 - 200	ºC
Die Temperature	380	ºC
Drying Temperature	160	ºC