myТехнические документы
Seetec H7525 is designed for the extrusion of staple fibers. Used in hygienic products, industrial filter, apparel.
Детали
CAS
9003-07-0
Тип продукта
Промышленность
Режиссер
Дреимущества
- Medium MWD
- good thermobonding
- anti-gas fading stabilization
Другие приложения
hygienic products
industrial filter
apparel
Обработка
SEETEC H7525 meets the FDA requirement in the code of Federal Regulations in 21 CFR 177.1520 for food contact.
Технические данные
| Количество | Стоимость | Е диница измерения | 3амечание |
|---|---|---|---|
| Физические свойства | |||
| Melting range | 140 - 170 | ºC | |
| Specific Gravity | 0.900 | ASTM D1505 | |
| MFI | 12 | g/10min | ASTM D1238@Load 2.16 kg;Temperature 230 °C |
| Тепловые свойства | |||
| Heat Deflection temperature | 106 | ºC | ASTM D648;at 0.46 MPa |
| Vicat softening temperature | 152 | ºC | ASTM D1525@Load 1.00 kg |
| flash point | >340 | ºC | |
| Механические свойства | |||
| Flexural modulus-MD | 1570 | MPa | ASTM D760 |
| Rockwell Hardness | 100 | Rockwell R;ASTM D785 | |
| Izod impact strength (notched) | 24.5 | J/m | ASTM D256@Temperature 23.0 |
| Tensile Stress at yield-MD | 34.3 | MPa | 50mm/min; ASTM D638 |
| Elongation at break-MD | <500 | % | 50mm/min; ASTM D638 |