Технические документы
Razamid® A121U-51 is a black colored, impact modified polyamide 66 grade. It is suitable for processing by injection molding. Used in automotive, electrical, construction and recreational applications.
Детали
Тип продукта
Режиссер
Химический состав
PA 66 (Nylon 66)
Дреимущества
- good strength
- good stiffness
- good toughness
- high melting point
- low specific weight
- excellent heat-, chemical and abrasion resistance
- impact modified
Другие приложения
Automotive
Buildings & constructions
Electrical markets > Electrical components
Recreational applications
Обработка
Meets with the requirements of ISO/TS16949:2002 and ISO9001:2000 standards.
Технические данные
Количество | Стоимость | Е диница измерения | 3амечание |
---|---|---|---|
Processing Temperature | 275 - 310 | ºC | |
dry Time | 2 - 4 | hr | |
Свойства внешнего вида | |||
Appearance | Black | ||
Физические свойства | |||
Shrinkage | 0.8 | % | ASTM D955; Linear |
Density | 1.13 | g/ml | ASTM D792 |
Тепловые свойства | |||
Heat Deflection temperature | 80 | ºC | ASTM D648;at 1.8 MPa |
Heat Deflection temperature | 215 | ºC | ASTM D648;at 0.46 MPa |
Vicat softening temperature | 225 | ºC | ASTM D1525 |
Melting point | 250 | ºC | ASTM D3418 |
Механические свойства | |||
Flexural modulus-MD | 2000 | MPa | ASTM D790 |
(Izod impact strength(notched | 12 | kJ/m² | ASTM D256; at 23°C |
Flexural strength | 95 | MPa | ASTM D790 |
Elongation at break-MD | 20 | % | ASTM D638 |
Tensile Stress at yield-MD | 60 | MPa | ASTM D638 |
Электрические свойства | |||
Surface Resistance | 1.00e+12 | ohm | IEC 60093 |
Volume resistance | 1.00e+13 | ohm-cm | IEC 60093 |
Dielectric Strength | 20 | Kv/mm | ASTM D149 |
Свойства процесса | |||
Mold Temperature | 50 - 80 | ºC | |
Middle Barrel Temperature | 265 - 300 | ºC | |
Drying Temperature | 90 - 110 | ºC |
Связаться с поставщиком
Чтобы связаться с поставщиками этого материала и зарегистрировать запрос о цене, выборке, консультации или предварительном счете, заполните форму заявки.