Технические документы
Di-isononyl phthalate (DINP). Used as a plasticizer in adhesives for PVC applications.
Детали
CAS
28553-12-0
Тип продукта
Рекомендуется для
зая́вки
Режиссер
поставщиком
Химический состав
Di-iso-nonyl-phthalate
Дреимущества
- give better cold flexibility and lower plastisol viscosity than DOP
- The higher molecular weight of DINP also reduces plastisol thickening
- has a wide variety of beneficial properties, both during processing and in finished products
Другие приложения
Adhesives
Обработка
VESTINOL 9 (DINP) can be mixed with any other commercially available plasticizer and is fully compatible with
PVC - even in highly plasticized formulations.
Технические данные
Количество | Стоимость | Е диница измерения | 3амечание |
---|---|---|---|
Volatile loss | 0.1 | % | (BS 1995/1953;(2h/130 ºC |
Свойства внешнего вида | |||
Refractive index | 1.484 - 1.488 | DIN 51 423/2 / ASTM D 1045;20 ºC | |
Color (Hazen) | <30 | DIN ISO 6271 / ASTM D 1209 | |
Appearance | |||
Физические свойства | |||
Vapor pressure | 7.425 | mm-Hg | 263ºC |
Vapor pressure | 5.775 | mm-Hg | 255ºC |
Vapor pressure | 3.675 | mm-Hg | 242ºC |
Vapor pressure | 0.975 | mm-Hg | 210ºC |
Vapor pressure | 2.4 | mm-Hg | 231ºC |
Pour point | -54 | ºC | ISO 3016 |
Molecular weight | 418.6 | g/mol | |
Water content | <0.05 | % | DIN 51 777 / ASTM E 203 |
Density | 0.972 - 0.977 | g/ml | DIN 51 757 / ASTM D 4052;20 ºC |
Viscosity | 72 - 82 | cP | DIN 53 015 / ASTM D 445;20 ºC |
Тепловые свойства | |||
Specific Heat Capacity | 1.78 | J/gºC | 20ºC |
Enthalpy of vaporization | 207 | kj/Kg | |
Auto-ignition temperature | 400 | ºC | DIN 51 794 / ASTM E 659 |
flash point | 200 | ºC | DIN EN 22 719 |
Химические свойства | |||
Saponification number | 265 | mg KOH/g | ASTM D 94 |
Hydroxyl number | 0.2 | mg KOH/g | photometric |
Ester content | >99 | % | GC;Degussa |
Acidity number | <0.04 | mg KOH/g | DIN EN ISO 2114 / ASTM D 1045 |
Электрические свойства | |||
Volume resistance | 1e+12 | ohm-cm | DIN 53 482;20ºC |