myТехнические документы
Детали
Тип продукта
зая́вки
Режиссер
поставщиком
Технические данные
| Количество | Стоимость | Е диница измерения | 3амечание |
|---|---|---|---|
| Свойства внешнего вида | |||
| Appearance | White | ||
| Физические свойства | |||
| MFI | 67.5 | g/10min | ISO 1133@Load 2.16 kg,Temperature 250 °C |
| Density | 1.50 | g/ml | ISO 1183 |
| Linear Mold Shrinkage | 0.018 - 0.020 | cm/cm | sheet with film gate at rim, mold temperature 80°C@Thickness 2.00 mm |
| Linear Mold Shrinkage | 0.019 | cm/cm | Transverse |
| Тепловые свойства | |||
| Flameability | @Thickness 1.60 mm | ||
| Flameability | @Thickness 0.800 mm | ||
| Vicat softening temperature | 192 | ºC | 50N; ISO 306 |
| Thermal Expansion | 100 | µm/m-°C | Longitudinal; ISO 11359, DIN 53752@Temperature 23.0-55.0 °C |
| Thermal Expansion | 100 | µm/m-°C | Transverse to Flow; ISO 11359, DIN 53752@Temperature 23.0-55.0 °C |
| Vicat softening temperature | 216 | ºC | Method A, 10 N; ISO 306 |
| Механические свойства | |||
| Elongation at break-MD | 5.0 | % | ISO 527-1/2 |
| Tensile modulus-MD | 3100 | MPa | ISO 527-1/-2 |
| Tensile Stress at break-MD | 55.0 | MPa | ISO 527-1/2 |
| (Charpy Impact Strength(unnotched | 30 | kJ/m² | ISO 179/1eU@Temperature 23.0 °C |
| (Charpy Impact Strength(unnotched | 30 | kJ/m² | ISO 179/1eU@Temperature -30.0 °C |
| Charpy Impact Strength (notched) | 3 | kJ/m² | ISO 179/1eA@Temperature 23.0 °C |
| Charpy Impact Strength (notched) | 3 | kJ/m² | ISO 179/1eA@Temperature -30.0 °C |
| Hardness Shore D | 81 | ISO 868 | |
| Химические свойства | |||
| Water absorption | 0.40 | % | ISO 62 -at Saturation |
| Электрические свойства | |||
| Comparative Tracking Index | 250 | V | Test Solution A CTI; IEC 60112 |
| Comparative Tracking Index | 225 | V | 100 drops value; IEC 60112 |
| Volume resistance | 1.00e+16 | ohm-cm | IEC 60093 |
| Surface Resistance | 1.00e+13 | ohm | IEC 60093 |