myاین پلیمر که تاخیر دهنده ی شعله است و جریان پذیری و مقاومت گرمایی بالایی دارد، گرید قالب گیری تزریقی می باشد.
جزئیات
CAS
9003-56-9
حوزه کاربردی
تولید کننده
داده های فنی
| کمیت | مقدار | واحد | توضیحات |
|---|---|---|---|
| خواص فیزیکی | |||
| Specific Gravity | 1.18 | ||
| Humidity | <2 | % | |
| Linear Mold Shrinkage | 0.004 - 0.006 | cm/cm | Thickness 3.2 mm |
| MFI | 18 | g/10min | 250°C/2.16Kg |
| خواص حرارتی | |||
| Flameability | 5VA | Thickness 2- mm | |
| Flameability | 5VA | Thickness 3- mm | |
| Flameability | 5VA | Thickness 1.5- mm | |
| Flameability | V-0 | Thickness 3- mm | |
| Flameability | V-2 | Thickness 1- mm | |
| Flameability | V-0 | Thickness 2- mm | |
| Flameability | V-0 | Thickness 1.5- mm | |
| UL RTI | 60 | ºC | Mechanical without Impact-Thickness 3- mm |
| UL RTI | 60 | ºC | Mechanical without Impact-Thickness 2- mm |
| UL RTI | 60 | ºC | Mechanical without Impact-Thickness 1.5- mm |
| UL RTI | 60 | ºC | Mechanical without Impact-Thickness 1- mm |
| UL RTI | 60 | ºC | Mechanical with Impact-Thickness 3- mm |
| UL RTI | 60 | ºC | Mechanical with Impact-Thickness 2- mm |
| UL RTI | 60 | ºC | Mechanical with Impact-Thickness 1.5- mm |
| UL RTI | 60 | ºC | Mechanical with Impact-Thickness 1- mm |
| UL RTI | 60 | ºC | Electrical-Thickness 3- mm |
| UL RTI | 60 | ºC | Electrical-Thickness 2- mm |
| UL RTI | 60 | ºC | Electrical-Thickness 1.5- mm |
| UL RTI | 60 | ºC | Electrical-Thickness 1- mm |
| Dry Time | 180 - 300 | min | |
| خواص مکانیکی | |||
| Rockwell Hardness | 113 | ||
| Izod impact strength (notched) | 343 | J/m | Thickness 3.2 mm |
| Flexural modulus-MD | 2451.66 | MPa | Thickness 6.4 mm |
| Flexural strength | 84.33 | MPa | Thickness 6.4 mm |
| Tensile strength | 58.84 | MPa | Thickness 3.2 mm |
| Elongation at break-MD | 50 | % | Thickness 3.2 mm |
| خواص فرایندی | |||
| Middle Barrel Temperature | 235 - 255 | ºC | |
| Mold Temperature | 50 - 80 | ºC | |
| Drying Temperature | 75 - 85 | ºC | |