myТехнические документы
Thermoplastic, medium viscosity plastic resin for injection molding, compression molding and extrusion.
Детали
Тип продукта
зая́вки
Промышленность
Режиссер
поставщиком
Другие приложения
Chemical facilities
machinery and vehicle construction
cable industry
Технические данные
| Количество | Стоимость | Е диница измерения | 3амечание |
|---|---|---|---|
| Физические свойства | |||
| MFI | 9.0 | g/10min | |
| Density | 1.78 | g/ml | |
| Тепловые свойства | |||
| Heat Deflection temperature | 70 | ºC | at 1.8 MPa |
| Heat Deflection temperature | 130 | ºC | at 0.46 MPa |
| Thermal Expansion | 100 | µm/m-°C | Transverse to Flow@Temperature 20.0 °C |
| Thermal Expansion | 100 | µm/m-°C | Parallel to Flow@Temperature 20.0 °C |
| Flameability | @Thickness 1.60 mm | ||
| Vicat softening temperature | 166 | ºC | 50°C/hr/50 N |
| Механические свойства | |||
| Tensile Impact strength | 160 | Kj/m² | |
| Charpy Impact Strength (notched) | 9 | kJ/m² | @Temperature -30.0 °C |
| Charpy Impact Strength (notched) | 17 | kJ/m² | |
| (Charpy Impact Strength(unnotched | 220 | kJ/m² | @Temperature -30.0 °C |
| (Charpy Impact Strength(unnotched | 280 | kJ/m² | |
| Elongation at yield | 8.0 | % | |
| Tensile modulus-MD | 2100 | MPa | |
| Elongation at break-MD | > 50 | % | |
| Tensile strength | 55.0 | MPa | |
| Химические свойства | |||
| Water absorption | 0.00 | % | |
| Электрические свойства | |||
| Dissipation Factor | 0.25 | @Frequency 1e+6 Hz | |
| Dissipation Factor | 0.032 | @Frequency 100 Hz | |
| Dielectric Strength | 21.0 | Kv/mm | |
| Electrical Resistivity | 2.00e+13 | ohm-cm | |
| Surface Resistance | > 1.00e+15 | ohm | |
| Dielectric Constant | 8.0 | @Frequency 1e+6 Hz | |
| Dielectric Constant | 10 | @Frequency 100 Hz | |
| Comparative Tracking Index | 250 | V | |