mySheet Extrusion or Injection Molding, PC/ABS+CNT, Electrostatic Dissipation, Wide Processing Range, Low Surface Resistivity
Детали Соединение
CAS
9003-56-9
зая́вки
Режиссер
Технические данные
| Количество | Стоимость | Е диница измерения | 3амечание |
|---|---|---|---|
| Физические свойства | |||
| Specific Gravity | 1.21 | ||
| MFI | 20 | g/10min | 300°C/2.16Kg |
| Linear Mold Shrinkage | 0.005 - 0.007 | cm/cm | Thickness 3.2 mm |
| Тепловые свойства | |||
| Heat Deflection temperature | 110 | ºC | |
| Dry Time | 300 - 420 | min | |
| Механические свойства | |||
| Izod impact strength (notched) | 34.3 | J/m | Thickness 3.2 mm |
| Flexural modulus-MD | 2745.86 | MPa | Thickness 6.4 mm |
| Tensile strength | 58.84 | MPa | Thickness 3.2 mm |
| Flexural strength | 98.06 | MPa | Thickness 6.4 mm |
| Elongation at break-MD | >14 | % | Thickness 3.2 mm |
| Электрические свойства | |||
| Surface Resistance | 1.000E+004 - 1.000E+006 | ohm | IEC 60093 |
| Свойства процесса | |||
| Middle Barrel Temperature | 290 - 310 | ºC | |
| Mold Temperature | 60 - 80 | ºC | |
| Drying Temperature | 70 - 80 | ºC | |