myТехнические документы
Детали
Тип продукта
зая́вки
Режиссер
поставщиком
Технические данные
| Количество | Стоимость | Е диница измерения | 3амечание |
|---|---|---|---|
| Физические свойства | |||
| Density | 1.26 | g/ml | ISO 1183 |
| Linear Mold Shrinkage | 0.014 | cm/cm | Pigmentation can change mold shrinkage. |
| Linear Mold Shrinkage | 0.014 | cm/cm | Pigmentation can change mold shrinkage.;Transverse |
| MFI | 15.12 | g/10min | ISO 1133@Load 2.16 kg, Temperature 250 °C |
| Melting range | 200 - 205 | ºC | DSC |
| Тепловые свойства | |||
| Thermal Expansion | 150 | µm/m-°C | Longitudinal; ISO 11359@Temperature 23.0 - 55.0 °C |
| Thermal Expansion | 150 | µm/m-°C | ISO 11359@Temperature 23.0 - 55.0 °C; Transverse to Flow |
| Heat Deflection temperature | 110 | ºC | ISO 75-1/2;at 0.46 MPa |
| Heat Deflection temperature | 50.0 | ºC | ISO 75-1/2;at 1.8 MPa |
| Vicat softening temperature | 125 | ºC | 50N; ISO 306 |
| Vicat softening temperature | 190 | ºC | 10N; ISO 306 |
| Flameability | @Thickness 0.800 mm | ||
| Flameability | @Thickness 1.60 mm | ||
| Механические свойства | |||
| Hardness Shore D | 65 | ISO 868 | |
| Ball indentation Hardness | 50.0 | MPa | H30; ISO 2039-1 |
| Tensile Stress at yield-MD | 27.0 | MPa | 50 mm/min; ISO 527-1/2 |
| Elongation at break-MD | >50 | % | 50 mm/min; ISO 527-1/2 |
| Tensile modulus-MD | 550 | MPa | ISO 527-1/2 |
| (Charpy Impact Strength(unnotched | kJ/m² | ISO 179/1eU@Temperature 23.0 °C | |
| (Charpy Impact Strength(unnotched | kJ/m² | ISO 179/1eU@Temperature -30.0 °C | |
| Charpy Impact Strength (notched) | 30 | kJ/m² | ISO 179/1eA@Temperature 23.0 °C |
| Charpy Impact Strength (notched) | 8 | kJ/m² | ISO 179/1eA@Temperature -30.0 °C |
| Elongation at yield | 23 | % | 50 mm/min; ISO 527-1/2 |
| Химические свойства | |||
| Water absorption | 0.35 | % | ISO 62;at Saturation |
| Oxirane Oxygen Content | 20 | % | ISO 4589 |
| Electrolytic Corrosion | IEC 60426 | ||
| Электрические свойства | |||
| Comparative Tracking Index | 600 | V | Test Solution A, CTI; IEC 60112 |
| Comparative Tracking Index | 575 | V | Test Solution A, 100 drops; IEC 60112 |
| Dielectric Strength | 27.0 | Kv/mm | K20/P50; IEC 60243-1 |
| Dissipation Factor | 0.033 | IEC 60250@Frequency 1e+6 Hz | |
| Dissipation Factor | 0.022 | IEC 60250@Frequency 100 Hz | |
| Dielectric Constant | 3.6 | IEC 60250@Frequency 1e+6 Hz | |
| Dielectric Constant | 4.0 | IEC 60250@Frequency 100 Hz | |
| Surface Resistance | 1.00e+13 | ohm | IEC 60093 |
| Volume resistance | 1.00e+15 | ohm-cm | IEC 60093 |